Last updated on 4.7.2018
Header Photo of A silysavg.com website - goodplanscheap
 
Loading
 
Inexpensive DIY Plans For Those With The CAN DO Spirit - Goodplanscheap motto

Search GoodPlansCheap

Useful Tips, Charts, Formulae, Links, Etc.

silysavg.com Menu

Books:       BABGAB:
white spacer image
Custom Ceramic Pet Memorials
Custom Ceramic Pet Memorials
white spacer image
category header

Tools Related - Previews

   Browse     Select a PLAN by Category 
Photo of plans for building your own Handscrews
Build Your Own Handscrews
These plans provide directions for making your own handscrews in size 10 inches and 14 inches.

With a bit of adaptation 6 inch and 8 inch Handscrews can also be made.

Item # 10 - 8 - 1
Cost >>$2.00
S & H *** U.S.A. >> $2.66

More Info OR,
Purchase Page Button Gif
 
Photo of plans for a Sheet-metal Brake
Benchtop Sheet-metal Brake From Wood
Neat right-angle bends and flat folds are easy to make with this simple, benchtop, sheet-metal brake.
Great for the hobbyist. Handles up to 26-gauge metal.

One page ( 1 sheet - front only )

Item # 10 - 8 - 4
Cost >>$1.00
S & H *** U.S.A. >> $2.66

More Info OR,
Purchase Page Button Gif
 
Pic
Reserved

ipsalom zet.
meta pega.
zum goa.

Item # x - xx - x

Cost >>$x.xx
S & H *** U.S.A. >> $x.xx
More Info OR,
 
Photo of plans for a Pair of Sheetmetal Cutters / Tin Snips
Tin Snips / Sheetmetal Cutter
These will cut in the center of a sheet with a .19 inch diameter starting hole and cut on either the upper or lower side of the sheet, whichever is more convenient.
As the blades cut, they curl a strip of metal ahead of the cutter. There is practically no distortion of the metal from the cutting action.
The cutter will handle up to .06 inch aluminum or .02 inch soft- steel sheet.

One page ( 1 sheet - front only )

Item # 10 - 8 - 2
Cost >>$1.00
S & H *** U.S.A. >> $2.66

More Info OR,
Purchase Page Button Gif
 
Photo of plans for a Pair of Sheetmetal Cutters / Tin Snips
Spindle Sander
This one beats hand sanding all hollow and curved edges of scroll work and other irregular pieces. It can be made for a song if you should happen to have a 1/4 hp motor.

Two pages ( 2 sheets - front on each sheet )

Item # 10 - 8 - 5
Cost >>$1.50
S & H *** U.S.A. >> $2.66

More Info OR,
Purchase Page Button Gif
 
Pic
Reserved

ipsalom zet.
meta pega.
zum goa.

Item # x - xx - x

Cost >>$x.xx
S & H *** U.S.A. >> $x.xx
More Info OR,
 
Photo of plans for a Hydraulic Arbor Press
Make a Hydraulic Arbor Press
When fully extended the press opens up to 12 1/4 inches from ram to base plate.
The ram has 14 holes for easy adjustment, and when the tie rod is in the holes closest to the ram, the ram will compress 10 tons.
And, used with a hydraulic jack, the press will bend up to 3/8 x 1 1/2 inch rectangular bar stock.

Two pages ( 2 sheets - front on each sheet )

Item # 10 - 8 - 3
Cost >>$2.50 - sold out
S & H *** U.S.A. >> $2.66

More Info OR,
Purchase Page Button Gif
 
Pic
Reserved

ipsalom zet.
meta pega.
zum goa.

Item # x - xx - x

Cost >>$x.xx
S & H *** U.S.A. >> $x.xx
More Info OR,
 
Pic
Reserved

ipsalom zet.
meta pega.
zum goa.

Item # x - xx - x

Cost >>$x.xx
S & H *** U.S.A. >> $x.xx
More Info OR,
 
 Page of 1  [ Back | Next ] 
bottom bar
Copyright 2008 silysavg.com
All Rights Reserved.

About silysavg.com | About GoodPlansCheap | About NaturesPickings | Site Map
Solution Graphics
Wild Mushroom Report, Southwestern Pennsylvania.
Wild Mushroom Report
Amazon Payments Link 
Valid XHTML 1.0 Transitional